Meanwell LRS-600 PSU Enclosure Mount — Technical Data Sheet

Terminal Protection & High-Current Power Integration Kit

Manufacturer: MnN Proto-Lab
Document reference: TDS-LRS600-002-REV2
Date: September 2026

1. Product Description

The Meanwell LRS-600 PSU Enclosure Mount is a model-specific terminal safety cover designed exclusively for the Meanwell LRS-600 power supply series. Its dual-chamber layout physically separates mains AC input wiring from low-voltage DC output connections, while the complete terminal shroud encloses exposed connections and provides clean cable exit paths for CNC, 3D-printing, LED, workshop, and control-panel installations.

2. Key Features & Included Components

• Dual-Chamber Isolation: An internal dividing barrier separates mains AC wiring from low-voltage DC output connections.
• Complete Terminal Shroud: Encloses the open terminal area to reduce accidental contact and provide a clean finished installation.
• Reinforced Construction: Printed in rigid PETG-CF for dimensional stability, durability, and heat resistance beside an operating power supply.
• Included Components: 1 × PETG-CF enclosure mount, 1 × MnN Proto-Lab press-fit IEC C14 socket, voltage-appropriate output hardware, and mounting screws.
• Power Supply Not Included: The Meanwell LRS-600 power supply is purchased separately.

3. Material & Component Specifications

Enclosure Body

• Material: PETG-CF, carbon-fibre reinforced PETG.
• Finish: Satin black.
• Characteristics: High rigidity, dimensional stability, impact resistance, chemical resistance, and suitable thermal performance for the intended enclosure application.

Electrical Connection Components

• AC Input: MnN Proto-Lab press-fit IEC C14 panel-mount socket.
• IEC Conductors: Solid copper with tin plating.
• 5 V, 12 V & 15 V Output: M8 high-current 100 A binding posts.
• 24 V, 27 V, 36 V & 48 V Output: Gold-plated binding posts.

4. Compatibility

Note: Slight dimensional variation may occur between manufacturing batches due to the additive manufacturing process.

5. Voltage Variant & SKU Matrix

6. Performance & Environmental Considerations

• Thermal Performance: PETG-CF provides suitable heat resistance for the intended location beside an operating LRS-600 power supply.
• Chemical Resistance: Resistant to common workshop oils and mild cleaning agents. Confirm compatibility before exposure to aggressive chemicals.
• Physical Protection: The enclosure helps reduce accidental finger or tool contact with the terminal area when correctly assembled.

7. Installation Responsibility & Safety

• Mains Wiring: Installation involves terminating mains-voltage wiring between the included IEC socket and the power supply terminals.
• Installer Responsibility: The installer is responsible for using appropriate wire ratings, insulation, protective earthing, strain relief, termination methods, and applicable electrical protection.
• Compliance: All assembly and use must comply with the electrical safety requirements and regulations applicable to the installation location.
• Pre-Use Inspection: Check polarity, earth continuity, insulation, terminal tightness, cable security, and enclosure fit before applying power.
• Damage: Do not energise the assembly if any enclosure part, conductor, terminal, insulation, or connection is damaged or insecure.

8. Revision Summary

REV2: Added the complete seven-variant SKU and output-hardware matrix, clarified included components, and updated installation responsibility and safety wording.